Build an aquaponic indoor farm – part 4 – water quality and nutrients testing

This is a description of how we at Johannas Stadsodlingar (urban farms) and Concinnity together have built Johanna’s aquaponic pilot facility. We want to share how we did it and our thinking behind it. There is quite a lot to think about, so there will be several posts to cover most things.

Cultivation Management Platform

The digital systems we have built are based around the vision we set out with at the start of the project. We call it the Cultivation Managment Platform.

Cultivation Management Platform, Copyright 2019 Johannas Stadsodlingar AB. Some rights reserved. Creative Commons BY-SA-NC 3.0.

The CMP consists of four parts:

  • Water quality and nutrients tests
  • Water, air and automation sensors
  • Production management
  • Distributed ledger / block chain

In this part we will describe our work with Water quality and nutrients tests.

An aquaponic farm is an ecosystem with many ”moving parts” and you need continuous, precise monitoring of it with the help of both manual and automated systems. On top of that it’s important for us to acquire as much knowledge as possible about the ins and outs of how the system actually works, like how long time different plants take from seed to harvest, how much the fish grow and so on. We use our CMP to achieve these goals with the help of modern technology in combination with our knowledge on plant and fish cultivation.

Water quality and nutrients tests

To get an understanding of an aquaponics system and to be sure that ”everything’s all right” we need to make regular tests of the water to be able to discover any problems that might arise and to analyze how the water quality affects the system as a whole.

When the system was started and the bacterial culture for the nitification process was built up, we took measurements every day to get good control and understanding of the growth process. Now, when the system is up and running in a stable manner, we measure most indicators once a week.

We had initially planned to use a system for data collection and analysis that we have worked with before, Avo Flow by Akvo Foundation. Akvo Flow consists of an Android based app for data collection with a web based backend for admin and visualization tools, along with an integration with photo-metric and other water quality sensor systems called Akvo Caddisfly. However we realized that the amount of reagent chemicals needed was larger than what was advisable in our fairly small pilot system.

Thus we chose to use a combination of photometric and other sensors from different suppliers. One of the down sides of this is that these other components have very poor or totally lacking digital integration, so we now have a large spreadsheet instead for all the data we collect this way.

IndicatorSensorComment
AlkalinityeXact iDip, ITS
AmmoniumeXact iDip, ITS
PhosphateeXact iDip, ITS;
Checker, Hanna Instruments
eXact iDip can only be used up to 3 ppm
HardnesseXact iDip, ITS
IronChecker, Hanna Instruments
PotassiumPhotometer Potassium, Hanna
Instruments
Dissolved oxygenHandy Polaris 2, OxyguardPortable reference meter
NitrateeXact iDip, ITS
NitriteeXact iDip, ITS
pHpH-Checker, Hanna
Instruments
Portable reference meter
Water quality and nutrients tests

Digital monitoring – Water, air and automation sensors

The system we developed for collection, storage and presentation of real-time data consists of two main parts. The system that collects the data is called Aquasensor and the system for storage and display of the data is called Aquadata.

An overview of the digital monitoring system, Aquasensor and Aquadata

Critical indicators as well as indicators that are relatively easy to measure are automatically measured every minute by the sensors. These sensors are connected to Aquasensor which is a tailor-made program written in the programming language Python. Aquasensor communicates with the sensors and collects raw data which is converted into measured values and then, via a buffer program, Grafsy, sends this data to the storage part of the system. The following are the most important indicators we measure:

IndicatorSensorComment / unit of measure
Electricity usageElectricity meter with pulse output1 pulse/Wh (1000 pulses/kWh)
LightTSL2561Lux
Air: temperatureSensirion SCD30°C
Air: humiditySensirion SCD30%
Air: CO2Sensirion SCD30ppm
Sensor hub, CPU-usageThe Linux operating system
Sensor hub, mains electricity230-volts relayon/off
Sensor hub, network packetsThe Linux operating system
Sensor hub, SMS signal strength3G-modem, Huawei E303% or dBm
Water: electric conductivitySensorex CS150TCmS/cm
Water flowXKC-Y25 inductive detectoron/off
Water intakeWater meter with pulse output53 pulses/liter
Water: dissolved oxygenVernier Optical DOmg/l
Water: level measurementUltra sound sensor, JSN-SR04T and a float switchcm
Water: pHSensorex pH2000
Water: temperatureDallas DS18B20°C
Drum filter cleaning230-volts relayon/off
Weather: humidityUSB-connected electronic weather station%
Weather: temperatureUSB-connected electronic weather station°C
Weather: air pressureUSB-connected electronic weather stationhPa
Indicators and equipment for automated sensors

The storage and display system, Aquadata, is based on the two open source software systems Graphite och Grafana.

System architecture of Aquasensor and Aquadata.

Graphite was originally a tool for monitoring computers. It has a database that is tailored for storing time series and is therefore well suited for other time-oriented data, such as sensor data from our aquaponics.

Grafana is a tool for visualizing data, with enormous flexibility in terms of the ability to combine information into larger dashboards. Several graphs can thus coexist on one screen and each graph can contain several different types of data, combined in a logical way.

Screenshot 2021-01-10 at 15.36.20

Grafana dashboard with data from Johanna’s pilot site

System implementation – Aquasensor

Aquasensor runs on RaspberryPi computers, we call them the ”Pies” or sensor hubs. We currently have two of them that collect data from different parts of the cultivation. Every full minute, data is collected from the sensors. Aquasensor uses a supporting software, Grafsy, to temporarily store the collected information. In turn, Grafsy sends data to the Aquadata storage system. Grafsy ensures that all information is delivered and data from several hours of measurements can be stored if communication with Aquadata is temporarily interrupted. A sensor hub can also have a ”sub-hub” which is an Arduino computer with sensors. Some sensors are easier to communicate with from an Arduino. Since power outages can occur, the Pies have backup power in the form of battery packs. They are of the same type that you can use to charge your mobile phone. In this way, Aquasensor can continue to monitor the cultivation even if the power goes out. If reserve power is available to the router, Aquasensor can continue to send data even during power outages, if the router does not work, the information is buffered in Grafsy until communication is re-established.

IMG_2481

Aquasensor connected to an electronic weather station (which uses wireless communication to get data from sensors on the roof).

System implementation – Aquadata

Aquadata is a system built around the open source software Graphite and Grafana. Graphite stores all information from the sensors and Grafana presents data in graphs that can be collected in dashboards. With these two systems as a base, we have built a cloud service that enables storage of sensor data over the Internet and access to the information in the same way.

Data and time series

Data collected by Aquasensor is sent to Aquadata. There it is stored in Graphite, a database that is tailored for storage of so-called time series, i.e. data containing a timestamp. When Aquasensor sends data from a sensor, it is in the form: ”name timestamp data”.

The configuration of the storage is automatic, when a measured value enters Aquadata, it is automatically added to the named series. If the name does not exist, it is created in the database and the information is added there as a first entry.

Example

Aquasensor sends the following data:

johannas.husby1.sensor.luft.co2.stickling 2020-12-14T02:16:00+02:00 348

The name of the measured value, johannas.husby1.sensor.luft.co2.stickling, contains a lot of information that specifies the kind of data we’re sending. The name is is made up of sub-names in a hierarchical structure. The first two parts of the name, johannas.husby1 is the facility we send data from. Then follows what type of data it is, sensor.luft.co2, i.e. carbon dioxide, and finally the name, stickling, of the sensor from which the measured value comes, in this case the sensor in the seedling room. Using this type of hierarchical names you can build logical structures for your data which in turn makes it easy to find the right information when it is to be presented in graphs.

The next part of the data is the timestamp, 2020-12-14T02:16:00+02:00. Most measurements are made every full minute, with the exception of EC (electric conductivity; measured by running a weak current through the water) which is made on the half minute so as not to interfere with the pH that is easily affected by it.

The last part of the measurement is the measured value, i.e. the data itself, 348. The unit is specified when creating the visualizations and is not part of the value, but is in most cases obvious. In the case of carbon dioxide content, it is ppm, parts per million.

Graphs and dashboards

The collected data is presented by Grafana, an open-source software for visualizing data. With Grafana, we have built dashboards, information panels where we collect information that ”fits together”. We currently have three main panels, Water, Cultivation Rooms and Tech infra, technical infrastructure. The water panel shows the values for temperature, oxygen content, pH and electrical conductivity. The Tech infra dashboard shows more ”physical” measurement values such as electricity consumption (and that we have electricity at all!), the system’s water level (to be able to alert if we get a major leak) and monitoring of the drum filter whose activity is indirectly an indication that the system is OK. The Cultivation Room panel shows the measurements we take in the seedling room, such as temperature, humidity and carbon dioxide content.

Grafana dashboards @ Johannas

Grafana dashboards on TV screens at the pilot site

Alterts

Aquasensor and Aquadata have two integrated alerting systems. On is SMS-based and sends an SMS to a list of telephone numbers in the event of an alarm condition. The second system is an integration with the cloud service PagerDuty, which can be configured to send alarms via: email, SMS and phone calls.

Digital security

Our monitoring system is explicitly not to be used to control the aquaponics. We are of the firm opinion that in the future it may be very difficult to protect ourselves from external actors who want to disrupt and/or destroy our computer systems, or to exercise digital blackmail by, for example, breaking into our system, encrypting the computer disks and request money to unlock data again. In systems that operate critical infrastructure, such as our fish farming, this should not be possible and our control systems are air-gapped, i.e. have no digital access from the internet or other external networks. This means that the data flow in our monitoring systems only goes in one direction: from the sensors to the local data server and on to the cloud service.

In the next post we will take a look at the Production managment system.

The text in this posted is licensed under Creative Commons BY-NC-SA International.

Build an aquaponic indoor farm – part 3 – build log

This is a description of how we at Johannas Stadsodlingar (urban farms) and Concinnity together have built Johanna’s aquaponic pilot facility. We want to share how we did it and our thinking behind it. There is quite a lot to think about, so there will be several posts to cover most things.

There are quite a few parts to the work of building a pilot plant for aquaponics. When we started, we thought it might take 9 months to do the job. We were wrong. It took almost two years. We worked mostly in the evenings and weekends during the first 9 months. After that, one of us started working full time in the company and during the past year we have also had additional help full time. We did not spend all the time building, but a large part of the time was spent on construction.

The building we are in a is an old farmhouse for cows, built in the eighties. It is 900 squremeters, and about 55 meters long and 16 meter wide internally.

IMG_7869

First we had to remove old equipment, such as the milk tank and the traverse for the feed wagon. Below, it is Micke who cuts the I-beam for the traverse where we would build the wall.

IMG_8650
IMG_7881

We chose not to use the entire building for the pilot plant, so needed to build a dividing wall. Here we see when Thomas, Micke and William are working on it.

IMG_8668 12 mikael thomas william wall building

The building had not been used (other than temporarily as a warehouse) for almost 15 years, see we needed to clean everything: walls, roof, cable ladders. It was a lot of work. Here Anke Johanna cleans the ceiling.

IMG_8684

We needed to inspect the drains to make sure they did not have any serious leaks. The drains are used to carry faeces from the fish to an external manure tank. Here Rasmus helps us to inspect the pipes.

IMG_9374

In the drain we found a toad that seem to live there during the winter.

IMG_E9376

We had decided to have an external sump tank. We needed to know that it could be dug at the location we chose and that it would not reach the bedrock, so we enlisted the help of a neighbor who dug a test hole with an excavator. The ”test hole” became large enough that we could improve it a bit by hand (William digs and Micke measures where to put the building) to later use as a hole for the sump tank. The hole was not really straight, as you can clearly see later.

IMG_9051

Work went a little slow so before we could work more on the sump tank and the building on top of it, the winter arrived and the hole was filled with groundwater and froze.

IMG_9557 We built a sump tank structure in wood, which Mikael was happy with, that we later dressed in a rubber lining. IMG_9339

The room that previously had the stall for the calves needed to be furnished to have a table for sowing and the small plants. We call it the cutting room or the calf room. First we needed a floor so we could install new drains.

image_from_ios

Here Mikael builds a table for the small plants, that will stand in water in trays.

IMG_9828

We thought for quite some time about how to hang the LED lights. In the end, it was a fairly simple construction in wood that actually works really well. Mikael came up with a good design in the end.

IMG_9866 IMG_9954 IMG_9960

The tables being covered by rubber lining.

IMG_0034

Building the large troughs for the plants was quite a lot of work, as the floor tilts quite a lot. We have a 10 cm difference between the highest and lowest point on the troughs at a distance of five to six meters. Each piece must be sawn perfectly and measured in place with a laser.

IMG_9898

We bought rainwater tanks with custom fitted rubber lining as fish tanks. Two tanks that hold approximately 9.5 cubic meters. We do not recommend that choice, but more on that later. Here Mikael cuts a hole for the outlet.

IMG_9924 IMG_9928

Piping with 110 mm PVC-U pipes from the fish tanks to the cultivation troughs. There you can also see the evacuation well that we created at the lowest point in the event of a flood. It turned out to be good to have in the future on several occasions.

IMG_0110

In parallel with this work, work was also underway to build our sensor system. Here, Stellan shows the first sensor hub, which measures slightly different things in the cutting room: light, temperature, humidity, carbon dioxide. We later added a sensor to the electricity meter. It also acts as a hub in the alarm system and has, among other things, an SMS modem.

IMG_0131

Here Gabriel is inspecting the first data packets that arrive to our data visualisation system which is based on Grafana and Graphite.

IMG_0136

Now we needed to connect the water system inside the building, fish tanks and cultivation troughs to the outside where the sump tank will be located. Mikael drills holes in the wall.

IMG_0237

Here you can see that our building is well insulated. We have about 15 cm of cellular plastic between the inner and outer wall.

IMG_0240

Then we started constructing the building where the sump tank is located. We needed to cast pillars on which the foundation will rest. It was really shitty weather when Mikael and William made the holes for them with a drill.

03 wet wet wet sump work

We prepare a stable and insulated base for the sump tank.

IMG_0257 IMG_0267

Then we lay the rubber lining that should be on the outside of the sump tank. (It’s made of wood, so it needs to be protected.) We got good help here from Stellan and Gabriel.

IMG_0271

The sump tank is put in place and then we put on the internal rubber lining.

IMG_0272 IMG_0277

The sump tank gets insulation. We also cover it up so that it doesn’t fill with rain until the roof gets built.

IMG_0296

Filling with gravel and soil around the sump tank. William drives his large back loader from Volvo, which we are very happy to have had access to.

IMG_0302 IMG_0358

A timelapse of pouring the concrete for the foundation of the sump house. The whole gang came out that day and helped.

Timelaps of pouring concrete for the sumptank building

Then we started to build the platform, or pier as we call it, around the fish tanks, on which the filter tank will also stand. We see William adding floor boards.

IMG_0332 IMG_0347 IMG_0400

The concrete floor that we have in the building is more or less in direct contact with the ground below, so we wanted to insulate the cultivation troughs. In addition, the rubber cloth becomes less sensitive if you have to walk on it if there is not a hard surface underneath. Here we have a timelapse of installing insulation, the rubber mat and the air hoses in one of the troughs.

Johannas Husby Farm Aquaponics, liner installation

We have installed air stones in the troughs to make sure that we do not get stagnant water and enough oxygen for both the bacterial culture and the plants’ roots. It is possible that we went a bit overboard with the amount of stones.

IMG_1277

We also had to replace all the doors, which we got second hand.

IMG_0775

We insulated the fish tanks at the bottom, so that they came at the right height for the outlets and pipes. After the rubber lining was installed in the tanks, we covered them to avoid getting building dust in them.

IMG_0766 IMG_0891

To reduce the humidity in the main growing room, we chose to install a dehumidifier. It will be more expensive in the long run than installing proper ventilation, but for now we can make do with a dehumidifier.

IMG_1457

The it was time to build the sump tank building. That turned into many a late night.

IMG_0825 IMG_0962 IMG_0977

Installation of the air pumps. It was good that we had a well-insulated sump tank building to install them in. They make a lot of noise.

IMG_1141 IMG_1207

The electricity network where our facility is located is not good. So a backup generator is necessary. But, since we work with live animals, we must have reserve power anyway. Here comes an insulated container for the backup generator.

IMG_1310 IMG_1565

To maintain the right temperature in the water, we have an air-to-water heat pump. For emergencies, there is also an electric heating cartridge installed, which the reserve generator is able to handle the load from.

IMG_1496 IMG_1500

When the weather got better, we were able to finish the roof of the sump tank building (Tomas working on it) and paint it (Anke).

IMG_1731 IMG_1586

We also installed a plexiglass lid on the sump tank so it is easy to see that the air pumps work and that the water level is where we expect it to be.

IMG_1665

Detail of water piping, air hoses, water meter, electric wiring etc.

IMG_1620

When we started filling the system with water, it turned out that we did not do the right thing when we glued the pipes. Many of the pipes needed additional gluing before we got rid of all the leaks. It took several weeks of work. Tip: When gluing PVC-U pipes, have plenty of glue on both pipes. Rubber lining bushings must have suitable glue properly applied.

IMG_1701

Our first attempt to feed the pump for the drum filter used a 120 litre barrel and automatic filling with well water. We had problems with the drum filter flushing at the wrong time or for too long. For that the barrel did not hold enough water. We redesigned this completely. At first we switched to taking water from an IBC tank, but in the end we did what we were supposed to do from the beginning: take water from the clean side of the drum filter.

IMG_1657

We had to install a max water level sensor on the drum filter to regulate the flushing pump.

IMG_1743

When we were satisfied that the leaks were fixed and that the filter flushing worked well, Lisa added bacterial media to the bacteria tank (Moving Bed Bio Reactor – MBBR).

IMG_1837 IMG_1812

We fed the bacterial culture with a little ground up fish food, but mainly with food grade ammonium chloride in powder form. The ammonia was added to a bucket of water the day before it was to be used and then bubbled with an aquarium pump for 24 hours to get rid of some of the chlorine. When the nutrient levels started to rise (ammonium converted to nitrite and nitrite to nitrate) we started to grow plants in the troughs.

IMG_1898

Even without fish in the system and very low nutrient levels, we saw surprisingly good growth, which was even better when the fish arrived.

IMG_1937

But eventually the fish came to our system. Here Tomas talks to Peter who delivers our smolt. We use rainbow in our system from 50 grams to 1.2 kg.

IMG_1928

The sensor system measures a number of different parameters every minute. Here you can see some.

Screenshot 2021-01-10 at 15.36.20

The sensor system delivers data locally to a small computer, but also to our cloud service, so that we can access the data on our mobile phones around the clock, without opening the internal system to the outside.

IMG_2469

The sensor box in the sump tank house also talks to a weather station that sits on the roof. (Even when it is zero degrees outside, we have 30 C in the sump tank house, it may have been a little too well insulated …, the heat comes from the air pumps.)

IMG_2481

Inductive water sensor on the outlet pipes to the fish tanks. It is one of the systems that can send alarms directly to our mobile phones if the water stops flowing in the pipes.

IMG_2468

Automatic water filling for the sump tank. We take system water to rinse the drum filter. That water goes to the manure tank. The fish feces and that water eventually becomes manure for the fields around the farm. Now water recovery in our system is about 99.5%, which we think we can improve to 99.9% or better when we start processing the fish feces for reuse in the system (remineralising it) instead of making manure for the fields.

IMG_2541

A picture of the system in production. We have faster and better growth of our plants than we expected!

Growth at Johannas Stadsodlingar

In the next post, we will discuss a our sensor and data system.

The text in this posted is licensed under Creative Commons BY-NC-SA International.

Build an aquaponic indoor farm – part 2 – design

This is a description of how we at Johannas Stadsodlingar (urban farms) and Concinnity together have built Johanna’s aquaponic pilot facility. We want to share how we did it and our thinking behind it. There is quite a lot to think about, so there will be several posts to cover most things. 

Part 1 – to start, prior knowledge
Part 2 – design (this post)
Part 3 – building log 
Part 4 – water quality and nutrients testing
Part 5 – Production management

Our pilot facility consists of 290 m2 in an insulated building that was previously a cow barn for about 140 cows. The farm was built in the mid 80’s and was then very modern. We have taken a third of the space available in the farm building. The pilot plant uses three rooms: the large cultivation room, of approximately 220 m2, the seeding/sappling room 24 m2 and the ”packaging room” 20m2. The rest are side surfaces. 

In the pilot plant, we will grow leafy greens, spices and rainbow trout (yes, nitrification bacteria of course). 

The first design was based around IBC tanks and three cultivation troughs with 60 x 120 cm rafts. Outside the building there is an area reserved for the sump tank. The fish would be in IBC tanks. We thought of using a radial flow separator to remove the coarsest solid particles and a filter box for the finer particles. Just as described in The Aquaponic Farmer (see part 1).

One of the first designs of the Johannas aquaponic pilot facility (version 3).
2D drawing of one of the first designs (version 4).

In the floor plan above, you can see that we have already rethought using two cultivation troughs instead of three. A narrower trough for rafts from Meteor Systems and one with more traditional rafts from Royal Brinkman (120 x 60 cm). In the Meteor rafts, we use a smaller substrate plug with significantly less material consumption. In the Brinkman rafts we use plastic pots. We were not sure what would work best in the Swedish market, so we wanted to try both.

Since we have a concrete floor, we can not have part of the filter system below the throughs easily, so we investigated other options for the filters. We chose to have a small drum filter instead. At the same time, we began to wonder if the fish we had decided on, the rainbow, would not feel much better in round tanks. In addition, we realized that the sump tank would need proper protection, so we started planning a building over the tank. Eventually, that building became our engine room as well. It turned out that this was very good, but it was a lot of work.

To have better access to the room where we ship out vegetables, we turned the design so that the fish tanks are furthest from the packing room, while it also has less people moving around the fish tanks (the doors are not there) which reduces stress for the fish. The round fish tanks are also more volume efficient.

Round fish tanks and the design flipped 180 degrees (version 8).

In the final design (below) you can see that we added a ”pier” around the fish tanks. The tanks were so high that it would be better to be able to get up a little when working there, without having to stand on a footstool. At the same time, we wanted to get the filter tank (Moving Bed Bio Reactor, MBBR) up from the floor, as the water level in our design is determined by the outlet on the filter tank as well as avoid pipes on the floor so you do not have to step over them all the time. Despite a lot of thinking around this, some of it came out less than optimal. We have a higher water level than we think is good and it would be quite a lot of work to rebuild it to lower the level. But, as I said, the goal of a pilot plant is to learn.

Final design of the pilot facility (version 12).

The facility has 3782 growing places in the two troughs, approximately 3200 growing places (depending on which trays you use) in the tables in the sampling room. We can have a total of about 7000 plants in the system at the same time. 

The water tanks are 9.5 m3 each. We have an IBC tank as MMBR (1m3). The sump tank holds approximately 4 m2, but we normally use 2 m2 of the space. The cultivation troughs together hold approximately 23-25 m3 (depending on how high the water level we set). Together, the total system uses approximately 35 m3 of water. We also have an IBC tank that will be used as a quarantine for incoming fish and preparation tank before slaughter. 

On the far side of the building you can see the sump tank building (beyond the round fish tanks) and the blue cube is a three meter container that contains a diesel powered generator.

In the next blog post we will document our building process in a build logg.

The text in these posts are licensed under Creative Commons BY-NC-SA International.

Build an aquaponic indoor farm – part 1 – start and prior knowledge

This is a description of how we at Johannas Stadsodlingar (urban farms) and Concinnity together have built Johanna’s aquaponic pilot facility. We want to share how we did it and our thinking behind it. There is quite a lot to think about, so there will be several posts to cover most things.

Part 1 – to start, prior knowledge (this post)
Part 2 – design
Part 3 – building log
Part 4 – water quality and nutrients testing
Part 5 – Production management

Three years ago, we at Johannas decided to start a company that produces food in circular production systems on a large scale. We started with fish and vegetables. The method we are going to use for this is called aquaponics. We have experience from cultivation and to start and run companies up to 100 employees. We have been studying circular cultivation systems for many years. However, we have not run an aquaponics operation before and we know that one of the problems people encounter when they start with aquaponics is that they often build a large-scale facility too early. You have to learn how to run an system which contains a mini-ecosystem with fish, bacterial cultures and vegetables. We decided to build a pilot plant at Husby farm in Vallentuna, north of Stockholm. Husby farm is owned by William, who is a partner in Johannas. We chose to use a third (290 m2) of a former dairy farm, which is about 900 m2.

William and Mikael in the old dairy farm at Husby.

If you are going to build an aquaponic facility, large or small, you should study first. We have three sources of information and inspiration that we can recommend. 

The ”basic course” in aquaponics is obtained from the UN’s agricultural agency FAO..It is a book in PDF format that you can download: Small-scale aquaponic food production, FAO 2014.

Small-scale aquaponic food production, FAO 2014.

Our aquaponics design is partly based on a description from the book The Aquaponics Farmer: A Complete Guide to Building and Operating an Aquaponic System, by Adrian Southern and Whelm King.

The Aquaponic farmer, Southern & King.

If you want to run an aquaponic facility on a smaller scale, say 1000 m2 of cultivation area. Then you might be able to cope with what you learn from the books. But we strongly recommend that you participate in some formal training, and example of this is the one-year course Fish and shellfish farming, which is a distance learning course in Sweden. Fish farming is the most sensitive part in aquaponics, and it can be very problematic if the fish dies. In addition, there are legal requirements in Sweden (and probably other countries) to have appropriate training in commercial animal husbandry.

Picture from the Swedish fish and shellfish long distance learning course.

We have also learned a lot from study visits, including at:

There are many more aspects of running an aquaponics facility that you need to have knowledge of. We decided to buid our pilot plant all by ourselves (with a few exceptions), primarily as we think you learn a lot from it. It is a lesson that is well worth it in our eyes, as we intend to scale up what we do much larger, and then we need to understand why things are designed as they are. In your team, you should have at least basic knowledge of the following:

  • Aquaculture
  • Vegetable growing
  • Water chemistry
  • Ecosystems
  • Sales and marketing
  • Business economics, such as accounting etc.
  • Food safety
  • Technical systems, such as pumps, oxygen meters, cooling, heating, etc.
  • Information Technology (IT) system

In our next blog post we will look at the design we picked and the changes we made along the way in our design.

The text in these posts are licensed under Creative Commons BY-NC-SA International.